Black wall-mount motorcycle helmet holder with lower gear hook, installed with two screws

Wall-Mount Motorcycle Helmet Holder

Black
$27.52
Skip to product information
Black wall-mount motorcycle helmet holder with lower gear hook, installed with two screws

Wall-Mount Motorcycle Helmet Holder

$27.52
ColorBlack

The PrintMoto Helmet Holder is a wall-mounted motorcycle helmet hanger that keeps your helmet off the garage floor, off the seat, and off the mirror. It installs with two screws, carries the helmet on an angled open-frame arm, and adds a lower hook for gloves, goggles, or keys. 3D-printed in black, it works in a garage, a shop, a mudroom, or next to the bike lift.

A Better Spot Than the Mirror or the Floor

A helmet is the most important piece of gear you own, and it usually lives in the worst places. Hung on a mirror, the liner gets pressed at one small point. Set on the seat, it is one bump away from a drop onto concrete. Left on the floor, it collects dust and whatever crawls in overnight. A dedicated wall holder ends all of that for less than the price of a tinted shield.


  • Off the floor and within reach. Mount it by the garage door or beside the bike so the helmet is the last thing you grab on the way out.

  • Room to dry. The helmet hangs in open air, so a sweaty or rain-soaked liner can air out between rides.

  • Lower gear hook. Hang gloves, goggles, or a neck tube under the helmet so everything for the ride lives in one place.

  • Two-screw install. Two mounting points hold the bracket flat to the wall. Screws and anchors included.

  • Open-frame arm. The truss-style arm keeps the holder stiff without adding bulk, and the matte black finish disappears against the wall.

For Adventure and Dual-Sport Helmets

ADV and dirt helmets come home wet, dusty, and sometimes packed with mud. Hanging one in open air beats zipping it into a helmet bag damp. The lower hook keeps goggles off the workbench, where lenses pick up scratches. The arm leaves 5 inches of wall clearance, enough for a peak visor.

Specs

Mounting

Wall mount, two screws

Hardware

included

Dimensions

127.151 x 120.965 x 31.75 mm

Helmet fit

Full-face, modular, ADV, dirt, and open-face helmets

Lower hook

Holds gloves, goggles, or keys

Material

PETG, 3D-printed

Color

Black

Quantity

1 holder per order


FAQs

What helmets fit this holder?

It fits full-face, modular, ADV, dirt, and open-face motorcycle helmets.

Does it come with mounting hardware?

Yes. Two screws and two drywall anchors are included.

Can I mount it on drywall?

Yes. Screw it into a stud when you can. If there is no stud where you want it, use drywall anchors rated for the weight of your helmet and gear.

Is a wall holder better than hanging a helmet on the mirror?

Yes. A mirror presses into the helmet liner at one small point and leaves the helmet one bump away from the ground. A wall holder keeps it secure and out of the way.

What is the lower hook for?

The lower hook holds gloves, goggles, keys, or a neck tube.

Is it sold as a single holder or a pair?

Each order includes one holder.

You may also like